LNG Carrier Steam Plant Tutor v4.1
How do I install the program?
Within the Operational Problems section, what is the Supervisor Mode password?
How do I install the program? 
1. If using Windows NT, 2000 or XP, log in as a user with "Administrator" privileges before completing the following steps. This does not apply to Windows 95, 98, 98SE or ME.
2. Insert CD in drive
3. Locate and run the file setup.exe
4. You should see the following window:
5. Click OK, the following window should appear:
.
6. Send the following information to Videotel by e-mail, telephone or fax:
- Program name and version (on CD label)
- “Hardware Fingerprint” (unique for each computer)
- Company or college name
- Ship name & IMO number (if applicable)
- Contact name
- E-mail address
- Telephone number
Videotel Support
Tel: +44 (0)20 7299 1825
Fax: +44 (0)20 7299 1818
7. Videotel will reply with entries for the “Key” and “Name” fields.
8. Run setup.exe again
9. Click OK on the first window, enter the "Name" and "Key" you received from Videotel, Click OK again.
10. The installation program will start, follow the on-screen instructions
11. Start the program from the Start menu shortcut
If you experience problems or have questions, please contact:
Within the Operational Problems section, what is the Supervisor Mode password?
The default password is: brunel
After you enter Supervisor Mode, using the default password, you can set a new password by completing these steps:
1. Click Supervisor Mode > Change Password
2. Enter a new password and then click OK. If you click OK before entering a new password, your new password will be recorded as an empty string (no characters). If this happens, please repeat step 1.
3. Record your password
